Which one fits?
- Torque
- 0.6 kN·m
- Moment
- 2 kN·m
- Ratio
- 51:1
- Weight
- 10.5 kg
The smallest here: the one to choose when its ratings cover your loads with a safe margin.
Typical uses: solar trackers, antennas and satellite dishes, camera and sensor positioners, small rotary tables.
Where it leads
-
Fastest turning. 51:1: the most output speed from the same motor, for quicker moves.
-
Lightest. 10.5 kg, 160.5 kg less than TD-W25: for mobile machines and wherever weight counts.
-
Most compact. 120 mm outer Ø, 590 mm less than TD-W25: fits where space is tight.
- Torque
- 0.6 kN·m
- Moment
- 2.8 kN·m
- Ratio
- 62:1
- Weight
- 14.38 kg
Against TD-W3: ±0% torque, +40% tilting moment, −15 mm bore, +3.9 kg.
Typical uses: solar trackers, antennas and satellite dishes, camera and sensor positioners, small rotary tables.
Why pick it
-
The size between TD-W3 and TD-W9. Pick it when TD-W3 is too small but TD-W9 too big: 30 mm more outer Ø than TD-W3, 150 mm less than TD-W9 and 35.6 kg lighter.
- Torque
- 6.3 kN·m
- Moment
- 25.6 kN·m
- Ratio
- 62:1
- Weight
- 50 kg
Against TD-W5: +950% torque, +814% tilting moment, +80 mm bore, +35.6 kg.
Typical uses: solar trackers, aerial work platforms, small cranes, welding positioners and robot arms.
Why pick it
-
The step between TD-W5 and TD-W12. Pick it when TD-W5 falls short on torque but TD-W12 would be more than you need: it gives +950% over TD-W5, and TD-W12 another +24% for +18 kg.
- Torque
- 7.8 kN·m
- Moment
- 57 kN·m
- Ratio
- 79:1
- Weight
- 68 kg
Against TD-W9: +24% torque, +123% tilting moment, +84 mm bore, +18 kg.
Typical uses: solar trackers, aerial work platforms, small cranes, welding positioners and robot arms.
Why pick it
-
The step between TD-W9 and TD-W14. Pick it when TD-W9 falls short on torque but TD-W14 would be more than you need: it gives +24% over TD-W9, and TD-W14 another +10% for +5 kg.
- Torque
- 8.6 kN·m
- Moment
- 71.2 kN·m
- Ratio
- 86:1
- Weight
- 73 kg
Against TD-W12: +10% torque, +25% tilting moment, +36 mm bore, +5 kg.
Typical uses: solar trackers, aerial work platforms, small cranes, welding positioners and robot arms.
Why pick it
-
The step between TD-W12 and TD-W17. Pick it when TD-W12 falls short on torque but TD-W17 would be more than you need: it gives +10% over TD-W12, and TD-W17 another +22% for +17 kg.
-
Good load for its weight. Ranks 4 of 8 here on load per kg (1 kN·m per kg).
- Torque
- 10.5 kN·m
- Moment
- 143 kN·m
- Ratio
- 104:1
- Weight
- 90 kg
Against TD-W14: +22% torque, +101% tilting moment, +90 mm bore, +17 kg.
Typical uses: truck-mounted and utility cranes, aerial platforms, digger derricks, large solar trackers.
Where it leads
-
Least backlash. 0.1° of play: the most precise positioning, for trackers, antennas and cameras.
-
Highest gear ratio. 104:1: finer positioning and more torque from a smaller motor, at a slower output speed.
- Torque
- 23.5 kN·m
- Moment
- 203.4 kN·m
- Ratio
- 90:1
- Weight
- 150 kg
Against TD-W17: +124% torque, +42% tilting moment, +77 mm bore, +60 kg.
Typical uses: truck-mounted and utility cranes, aerial platforms, digger derricks, large solar trackers.
Why pick it
-
The step between TD-W17 and TD-W25. Pick it when TD-W17 falls short on torque but TD-W25 would be more than you need: it gives +124% over TD-W17, and TD-W25 another +15% for +21 kg.
-
Good load for its weight. Ranks 3 of 8 here on load per kg (1.4 kN·m per kg).
- Torque
- 27 kN·m
- Moment
- 310 kN·m
- Ratio
- 104:1
- Weight
- 171 kg
Against TD-W21: +15% torque, +52% tilting moment, +93 mm bore, +21 kg.
Typical uses: heavy cranes and lifting equipment, drilling rigs, wind turbine yaw and pitch systems, large positioners.
Where it leads
-
Most output torque. 27 kN·m nominal, 45× TD-W3: turns heavier and off-centre loads, and keeps going against the wind.
-
Highest load capacity. 2360 kN axial and 310 kN·m tilting moment, 155× the moment of TD-W3: the one for heavy loads and long booms or arms.
-
Strongest hold when stopped. Holds up to 158.3 kN·m at rest: keeps the load in position against wind or an overhanging weight.
-
Highest gear ratio. 104:1: finer positioning and more torque from a smaller motor, at a slower output speed.
Guidance drawn from the catalogue ratings. Our engineers will confirm the right size for your loads and duty cycle.
All specifications