Side by side

Compare the TD-W-2 models

What each model does best, what you gain or give up between sizes, and every specification side by side.

4 models

Which one fits?

TD-W14-2RA Size 1 of 4
Torque
13 kN·m
Moment
71.2 kN·m
Ratio
31:1

The smallest here: the one to choose when its ratings cover your loads with a safe margin.

Typical uses: solar trackers, aerial work platforms, small cranes, welding positioners and robot arms.

Where it leads

  • Fastest turning. 31:1: the most output speed from the same motor, for quicker moves.
  • Most compact. 420 mm outer Ø, 290 mm less than TD-W25-2RA: fits where space is tight.
TD-W17-2RA Size 2 of 4
Torque
15.7 kN·m
Moment
143 kN·m
Ratio
104:1
Weight
114 kg

Against TD-W14-2RA: +21% torque, +101% tilting moment, +67 mm bore.

Typical uses: truck-mounted and utility cranes, aerial platforms, digger derricks, large solar trackers.

Where it leads

  • Highest gear ratio. 104:1: finer positioning and more torque from a smaller motor, at a slower output speed.
TD-W21-2RA Size 3 of 4
Torque
34 kN·m
Moment
203 kN·m
Ratio
45:1

Against TD-W17-2RA: +117% torque, +42% tilting moment, +99.8 mm bore.

Typical uses: truck-mounted and utility cranes, aerial platforms, digger derricks, large solar trackers.

Where it leads

  • Least backlash. 0.12° of play: the most precise positioning, for trackers, antennas and cameras.
TD-W25-2RA Size 4 of 4
Torque
40 kN·m
Moment
310 kN·m
Ratio
104:1

Against TD-W21-2RA: +18% torque, +53% tilting moment, +93.2 mm bore.

Typical uses: heavy cranes and lifting equipment, drilling rigs, wind turbine yaw and pitch systems, large positioners.

Where it leads

  • Most output torque. 40 kN·m nominal, 3.1× TD-W14-2RA: turns heavier and off-centre loads, and keeps going against the wind.
  • Highest load capacity. 2360 kN axial and 310 kN·m tilting moment, 4.4× the moment of TD-W14-2RA: the one for heavy loads and long booms or arms.
  • Strongest hold when stopped. Holds up to 237 kN·m at rest: keeps the load in position against wind or an overhanging weight.
  • Highest gear ratio. 104:1: finer positioning and more torque from a smaller motor, at a slower output speed.

Guidance drawn from the catalogue ratings. Our engineers will confirm the right size for your loads and duty cycle.

All specifications

Specification TD-W14-2RA TD-W-2 TD-W17-2RA TD-W-2 TD-W21-2RA TD-W-2 TD-W25-2RA TD-W-2
Dimensions
Housing width W 108 105 120 120
Ring width Wo 100 — 114 114
Outer ring Ø B 420 510 620 710
Outer ring inner Ø C 352 442 540 630
Bore Ø E 265 332 431.8 525
Inner ring outer Ø F 360 450 550 640
Housing Ø D 480 — 675 770
Outer bolt circle Ø Do 390 479.4 584.2 675
Outer holes No 18 20 36 36
Outer hole size do M16 M16 M20 M20
Outer hole depth ho 30 30 40 40
Inner bolt circle Ø Di 295 365.1 466.7 560
Inner holes Ni 23 20 35 35
Inner hole size di M16 M16 M20 M20
Inner hole depth hi 30 30 40 40
Total height H 632 702 822 916
Ring axis to base Ho 250 285 345 392
Ring axis to worm axis Hi 250 285 345 392
Total length L 389 423 496 526
Ring axis to opposite end La 199 216 251 266
Ring axis to input end Lr 190 207 245 260
Performance Parameters
Nominal Torque kN·m 13 15.7 34 40
Maximum Torque kN·m — 23.4 — 60
Gear Ratio 31:1 104:1 45:1 104:1
Backlash 0.15° 0.15° 0.12° 0.15°
Efficiency 40% 40% 40% 40%
Temperature ºC -20° / +80° -20° / +80° -20° / +80° -20° / +80°
Holding Torque kN·m — 94 — 237
Axial Static Load kN 960 1166 1598 2360
Radial Static Load kN 360 435 640 945
Axial Dynamic Load kN 230 280 385 590
Radial Dynamic Load kN 200 231 335 470
Tilting Moment Load kN·m 71.2 143 203 310
Weight kg — 114 — —
Request a Quote Request a Quote Request a Quote Request a Quote

All dimensions in mm.