Side by side

Compare the TD-O models

What each model does best, what you gain or give up between sizes, and every specification side by side.

2 models

Which one fits?

TD-O-14 Size 1 of 2
Torque
8 kN·m
Moment
71.2 kN·m
Ratio
86:1

The smallest here: the one to choose when its ratings cover your loads with a safe margin.

Typical uses: solar trackers, aerial work platforms, small cranes, welding positioners and robot arms.

Where it leads

  • Fastest turning. 86:1: the most output speed from the same motor, for quicker moves.
TD-O-17 Size 2 of 2
Torque
10.5 kN·m
Moment
143 kN·m
Ratio
104:1

Against TD-O-14: +31% torque, +101% tilting moment, +72 mm bore.

Where it leads

  • Most output torque. 10.5 kN·m nominal, 1.3× TD-O-14: turns heavier and off-centre loads, and keeps going against the wind.
  • Highest load capacity. 1166 kN axial and 143 kN·m tilting moment, 2× the moment of TD-O-14: the one for heavy loads and long booms or arms.
  • Strongest hold when stopped. Holds up to 72.3 kN·m at rest: keeps the load in position against wind or an overhanging weight.
  • Least backlash. 0.13° of play: the most precise positioning, for trackers, antennas and cameras.

Guidance drawn from the catalogue ratings. Our engineers will confirm the right size for your loads and duty cycle.

All specifications

Specification TD-O-14 TD-O TD-O-17 TD-O Add a model Pick more from any series in the catalogue.
Dimensions
Housing width W — —
Ring width Wo 85 87.5
Outer ring Ø B 415 —
Outer ring inner Ø C 342 425
Bore Ø E 258 330
Inner ring outer Ø F 345 430
Housing Ø D 443 534
Outer bolt circle Ø Do 390 479.4
Outer holes No 16 20
Outer hole size do M18 M16
Outer hole depth ho — —
Inner bolt circle Ø Di 295 365
Inner holes Ni 23 20
Inner hole size di M18 M16
Inner hole depth hi — —
Total height H 526.5 617
Ring axis to base Ho 305 350
Ring axis to worm axis Hi 240 285
Total length L 360 406
Ring axis to opposite end La 188 211
Ring axis to input end Lr 172 195
Performance Parameters
Nominal Torque kN·m 8 10.5
Maximum Torque kN·m 12 15.6
Gear Ratio 86:1 104:1
Backlash 0.15° 0.13°
Efficiency 40% 40%
Temperature ºC -20° / +80° -20° / +80°
Holding Torque kN·m 48 72.3
Axial Static Load kN 960 1166
Radial Static Load kN 360 435
Axial Dynamic Load kN 230 280
Radial Dynamic Load kN 200 231
Tilting Moment Load kN·m 71.2 143
Request a Quote Request a Quote

All dimensions in mm.