Side by side

Compare the TD-E models

What each model does best, what you gain or give up between sizes, and every specification side by side.

8 models TD-E

Which one fits?

TD-E7 Size 1 of 8
Torque
3.4 kN·m
Moment
13.5 kN·m
Ratio
45:1
Weight
30.4 kg

The smallest here: the one to choose when its ratings cover your loads with a safe margin.

Typical uses: solar trackers, antennas and satellite dishes, camera and sensor positioners, small rotary tables.

Where it leads

  • Fastest turning. 45:1: the most output speed from the same motor, for quicker moves.
  • Lightest. 30.4 kg, 312.72 kg less than TD-E37: for mobile machines and wherever weight counts.
  • Most compact. 225 mm outer Ø, 865 mm less than TD-E37: fits where space is tight.
TD-E9 Size 2 of 8
Torque
6.3 kN·m
Moment
35.6 kN·m
Ratio
62:1
Weight
43 kg

Against TD-E7: +85% torque, +164% tilting moment, +48 mm bore, +12.6 kg.

Typical uses: solar trackers, aerial work platforms, small cranes, welding positioners and robot arms.

Why pick it

  • The step between TD-E7 and TD-E12. Pick it when TD-E7 falls short on torque but TD-E12 would be more than you need: it gives +85% over TD-E7, and TD-E12 another +24% for +14 kg.
TD-E12 Size 3 of 8
Torque
7.8 kN·m
Moment
57 kN·m
Ratio
79:1
Weight
57 kg

Against TD-E9: +24% torque, +60% tilting moment, +83 mm bore, +14 kg.

Typical uses: solar trackers, aerial work platforms, small cranes, welding positioners and robot arms.

Why pick it

  • The step between TD-E9 and TD-E14. Pick it when TD-E9 falls short on torque but TD-E14 would be more than you need: it gives +24% over TD-E9, and TD-E14 another +31% for +3 kg.
TD-E14 Size 4 of 8
Torque
10.2 kN·m
Moment
71.2 kN·m
Ratio
86:1
Weight
60 kg

Against TD-E12: +31% torque, +25% tilting moment, +36 mm bore, +3 kg.

Typical uses: solar trackers, aerial work platforms, small cranes, welding positioners and robot arms.

Where it leads

  • Least backlash. 0.13° of play: the most precise positioning, for trackers, antennas and cameras.
TD-E17 Size 5 of 8
Torque
14.7 kN·m
Moment
143 kN·m
Ratio
104:1
Weight
83 kg

Against TD-E14: +44% torque, +101% tilting moment, +70 mm bore, +23 kg.

Typical uses: truck-mounted and utility cranes, aerial platforms, digger derricks, large solar trackers.

Why pick it

  • The step between TD-E14 and TD-E19. Pick it when TD-E14 falls short on torque but TD-E19 would be more than you need: it gives +44% over TD-E14, and TD-E19 another +26% for +33 kg.
  • Good load for its weight. Ranks 3 of 8 here on load per kg (1.7 kN·m per kg).
TD-E19 Size 6 of 8
Torque
18.5 kN·m
Moment
210 kN·m
Ratio
94:1
Weight
116 kg

Against TD-E17: +26% torque, +47% tilting moment, +45 mm bore, +33 kg.

Typical uses: truck-mounted and utility cranes, aerial platforms, digger derricks, large solar trackers.

Why pick it

  • The step between TD-E17 and TD-E25. Pick it when TD-E17 falls short on torque but TD-E25 would be more than you need: it gives +26% over TD-E17, and TD-E25 another +46% for +52 kg.
  • Good load for its weight. Ranks 2 of 8 here on load per kg (1.8 kN·m per kg).
TD-E25 Size 7 of 8
Torque
27 kN·m
Moment
310 kN·m
Ratio
104:1
Weight
168 kg

Against TD-E19: +46% torque, +48% tilting moment, +145 mm bore, +52 kg.

Typical uses: heavy cranes and lifting equipment, drilling rigs, wind turbine yaw and pitch systems, large positioners.

Where it leads

  • Highest axial load. 2360 kN static, 8.7× TD-E7: for heavy loads bearing straight down on the ring.
  • Strongest hold when stopped. Holds up to 158.3 kN·m at rest: keeps the load in position against wind or an overhanging weight.
  • Longest life in rotation. Dynamic ratings of 875 kN axial / 215 kN radial: lasts the most turns when it rotates continuously or under load.
  • Most capacity per kilo. 1.8 kN·m of tilting moment per kg, the best ratio here.
TD-E37 Size 8 of 8
Torque
30 kN·m
Moment
450 kN·m
Ratio
153:1
Weight
343.12 kg

Against TD-E25: +11% torque, +45% tilting moment, +305 mm bore, +175.1 kg.

Typical uses: heavy cranes and lifting equipment, drilling rigs, wind turbine yaw and pitch systems, large positioners.

Where it leads

  • Most output torque. 30 kN·m nominal, 8.8× TD-E7: turns heavier and off-centre loads, and keeps going against the wind.
  • Highest tilting moment. 450 kN·m, 33.3× TD-E7: the one for overhanging loads such as booms, arms and offset platforms.
  • Highest gear ratio. 153:1: finer positioning and more torque from a smaller motor, at a slower output speed.
  • Largest centre bore. 830 mm inside: room for cables, hoses, a rotary joint or a shaft through the middle.

Guidance drawn from the catalogue ratings. Our engineers will confirm the right size for your loads and duty cycle.

All specifications

Specification TD-E7 TD-E TD-E9 TD-E TD-E12 TD-E TD-E14 TD-E TD-E17 TD-E TD-E19 TD-E TD-E25 TD-E TD-E37 TD-E
Dimensions
Housing width W 97 97 97 97 97 100 114 156
Ring width Wo 82 82 82 82 86 108 120 140.5
Outer ring Ø B 225 300 390 420 510 570 710 1090
Outer ring inner Ø C 163 225 310 345 435 480 630 935
Bore Ø E 98 146 229 265 335 380 525 830
Inner ring outer Ø F 190 250 340 380 470 490 640 935
Housing Ø D 266 346 436 466 561 625 769.2 1120
Outer bolt circle Ø Do 190 270 358 390 480 520 675 1000
Outer holes No 8 16 16 18 20 32 24 28
Outer hole size do M12 M16 M16 M16 M16 M16 M20 M20
Outer hole depth ho 25 30 30 30 30 30 40 40
Inner bolt circle Ø Di 120.5 175 259 295 365 420 565 870
Inner holes Ni 10 15 15 23 20 31 24 32
Inner hole size di M12 M16 M16 M16 M16 M16 M20 M20
Inner hole depth hi — — — — — 30 40 50
Total height H 333 413 503 533 628 691 842.6 1214.5
Ring axis to base Ho 200 240 285 300 347.5 378.5 458 654.5
Ring axis to worm axis Hi 135 175 220 235 282.5 312.5 392.5 568
Total length L 311 341 381 395 429 451 535 602
Ring axis to opposite end La 164 179 199 205 222 234 275 301
Ring axis to input end Lr 147 162 182 190 207 217 260 301
Performance Parameters
Nominal Torque kN·m 3.4 6.3 7.8 10.2 14.7 18.5 27 30
Maximum Torque kN·m 6.5 9.5 11.8 12.9 15.6 27 42.8 36
Gear Ratio 45:1 62:1 79:1 86:1 104:1 94:1 104:1 153:1
Backlash 0.17° 0.15° 0.15° 0.13° 0.15° 0.15° 0.15° 0.15°
Efficiency 40% 40% 40% 40% 40% 40% 40% 40%
Temperature ºC -30° / +80° -30° / +80° -30° / +80° -30° / +80° -30° / +80° -30° / +80° -30° / +80° -30° / +80°
Holding Torque kN·m 20 34.8 43 43 65 85 158.3 80
Axial Static Load kN 270 578 760 960 1166 1800 2360 2100
Radial Static Load kN 94 215 280 360 435 675 945 800
Axial Dynamic Load kN 97 136 190 230 280 290 875 500
Radial Dynamic Load kN 83 115 145 200 231 250 215 400
Tilting Moment Load kN·m 13.5 35.6 57 71.2 143 210 310 450
Weight kg 30.4 43 57 60 83 116 168 343.12
Request a Quote Request a Quote Request a Quote Request a Quote Request a Quote Request a Quote Request a Quote Request a Quote

All dimensions in mm.