Which one fits?
- Torque
- 6.3 kN·m
- Moment
- 40 kN·m
- Ratio
- 62:1
- Weight
- 50 kg
The smallest here: the one to choose when its ratings cover your loads with a safe margin.
Typical uses: solar trackers, aerial work platforms, small cranes, welding positioners and robot arms.
Where it leads
-
Fastest turning. 62:1: the most output speed from the same motor, for quicker moves.
-
Lightest. 50 kg, 132.12 kg less than TD-2-E25: for mobile machines and wherever weight counts.
-
Most compact. 300 mm outer Ø, 410 mm less than TD-2-E25: fits where space is tight.
- Torque
- 8.6 kN·m
- Moment
- 118 kN·m
- Ratio
- 86:1
- Weight
- 72.49 kg
Against TD-2-E9: +37% torque, +195% tilting moment, +120 mm bore, +22.5 kg.
Typical uses: solar trackers, aerial work platforms, small cranes, welding positioners and robot arms.
Why pick it
-
The step between TD-2-E9 and TD-2-E17. Pick it when TD-2-E9 falls short on torque but TD-2-E17 would be more than you need: it gives +37% over TD-2-E9, and TD-2-E17 another +22% for +36.5 kg.
- Torque
- 10.5 kN·m
- Moment
- 214 kN·m
- Ratio
- 104:1
- Weight
- 109 kg
Against TD-2-E14: +22% torque, +81% tilting moment, +70 mm bore, +36.5 kg.
Typical uses: truck-mounted and utility cranes, aerial platforms, digger derricks, large solar trackers.
Where it leads
-
Least backlash. 0.1° of play: the most precise positioning, for trackers, antennas and cameras.
-
Highest gear ratio. 104:1: finer positioning and more torque from a smaller motor, at a slower output speed.
- Torque
- 18.5 kN·m
- Moment
- 294 kN·m
- Ratio
- 94:1
- Weight
- 139.32 kg
Against TD-2-E17: +76% torque, +37% tilting moment, +45 mm bore, +30.3 kg.
Typical uses: truck-mounted and utility cranes, aerial platforms, digger derricks, large solar trackers.
Where it leads
-
Least backlash. 0.1° of play: the most precise positioning, for trackers, antennas and cameras.
- Torque
- 27 kN·m
- Moment
- 465 kN·m
- Ratio
- 104:1
- Weight
- 182.12 kg
Against TD-2-E19: +46% torque, +58% tilting moment, +145 mm bore, +42.8 kg.
Typical uses: heavy cranes and lifting equipment, drilling rigs, wind turbine yaw and pitch systems, large positioners.
Where it leads
-
Most output torque. 27 kN·m nominal, 4.3× TD-2-E9: turns heavier and off-centre loads, and keeps going against the wind.
-
Highest load capacity. 3540 kN axial and 465 kN·m tilting moment, 11.6× the moment of TD-2-E9: the one for heavy loads and long booms or arms.
-
Strongest hold when stopped. Holds up to 158.3 kN·m at rest: keeps the load in position against wind or an overhanging weight.
-
Least backlash. 0.1° of play: the most precise positioning, for trackers, antennas and cameras.
Guidance drawn from the catalogue ratings. Our engineers will confirm the right size for your loads and duty cycle.
All specifications